How to Operate the Wisper SE LCD Display

The Wisper SE LCD display gives you full control over your electric bike’s power, assistance levels, and key ride information. Follow the steps below to operate all functions safely and efficiently.

Video Guide: How to Operate the Wisper SE LCD Display

Step by Step Guide:

1. Power On the Display

Press and hold the Power button to activate the Wisper SE LCD display.

Activate by pressing the power button - How to Operate Wisper SE LCD

2. Turn On the Lights

Press the Power button once to switch on the front and rear lights.

Activate lights by pressing power button once

3. Turn Off the Lights

Press the Power button once again to switch the lights off.

Deactivate lights by pressing the power button once again

4. Increase Pedal Assistance

Press the Up Arrow to raise the assistance level.

Increase assistance using the up arrow button

5. Decrease Pedal Assistance

Press the Down Arrow to lower the assistance level.

Decrease assistance using the down arrow button

6. Switch Between Trip & Total Mileage

Press the Up Arrow and Down Arrow together twice to toggle between
Trip Distance and Total Mileage (Odometer).

Change between trip and tola milage by clicking the up and down arrow twice

7. Reset the Trip Mileage

Press the Power button twice to clear the trip reading.

To clear the trip mileage press the power button twice

8. Change Speed Units (mph ↔ km/h)

Hold the Power button and Down Arrow together to switch the units.

Hold down the power and minus button to change from mph to kmh

9. Turn Off the Bike

Press the Power button once to switch off the display and bike.

Press the power button once and it will turn the bike off